最近2019中文字幕大全高清版 ,爱抚乳头视频

Product

CONTACT

TEL

0086-0755-27299931

0086-0755-27299961

0086-0755-33675266

< >

Standard Aluminum electrolytic capacitor
Series：LSMD
Sort：Standard Aluminum electrolytic capacitor
Category：Standard Aluminum electrolytic capacitor
Rated voltage range（Vdc）：40～450

Download

Working cap temperature. Standard life(hours)
Detailed
Specification

105℃ 5000 hours

◆SPECIFIC ATIONS

items	characteristics
Category temperature Range	-40～+105℃
Rated voltage Range	25～450_VDC
Capacitance Tolerance	-0％～+30%（T） 20℃/120HZ
Leakage Current	I=0.02CV or 5mA,whichever is smaller I: Where, I : Max. leakage current（µA）、C: Nominal capacitance（µF）、Rated voltage (V)at 20℃after 5 minutes)
Dissipation Factor（tanδ）	Shall not exceed the values shown in the standard ratings 20℃/120HZ
Low Temperature characteristics	Capacitance change C（-25℃）/C（+20℃）≥0.7 20℃/120HZ
Insulation Resistance	When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100mΩ
Insulation Withstanding Voltage	When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.。
Endurance	The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃。
	Capacitance change	≤±5% of the initial value
	D.F. (tanδ)	≤200% of the initial specified value
	Leakage current	≤The initial specified value
Shelf Life	The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
	Capacitance change	≤±5% of the initial value
	D.F. (tanδ)	≤150% of the initial specified value
	Leakage current	≤The initial specified value

Please refer to "Product code guide (screw-mount terminal type)"
Product specifications in this catalog are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications
SRANDRAD RATINGS

W.V[Vdc]	cap[μF]	Case sizeD x L[mm]	tanδ120HZ,20℃[mΩ]	Rated ripple current (Ams/105℃,120HZ）	Part NO.
25V	12000	50*39	0.15	2.5	LSMD250M5C123TC39
25V	20000	50*49	0.15	3.8	LSMD250M5C203TC49
40V	7500	50*39	0.15	2.1	LSMD400M5C752TC39
	12000	50*49	0.15	6.2	LSMD400M5C123TC49
	56000	50*80	0.15	12.3	LSMD400M5C563TC80
	100000	75*69	0.15	16.2	LSMD400M5C104TE69
	150000	90*69	0.15	20.8	LSMD400M5C154TF69
	180000	75*100	0.15	22.9	LSMD400M5C184TEA5
	220000	90*98	0.15	28.3	LSMD400M5C224TF98
50V	4700	50*39	0.15	3.8	LSMD550M5C472TC39
	7500	50*49	0.15	5.1	LSMD550M5C752TC49
	33000	50*80	0.15	10.5	LSMD550M5C333TC80
	56000	75*69	0.15	11.6	LSMD550M5C563TE69
	68000	75*100	0.15	18.1	LSMD550M5C683TEA5
	82000	90*69	0.15	19.2	LSMD550M5C823TF69
	150000	90*98	0.15	20.1	LSMD550M5C154TF98
63V	3900	50*39	0.15	2.6	LSMD630M5C392TC39
	6000	50*49	0.15	6.1	LSMD630M5C602TC49
	27000	50*80	0.15	11.4	LSMD630M5C272TC80
	47000	75*69	0.15	16.3	LSMD630M5C473TE69
	82000	75*100	0.15	20.4	LSMD630M5C823TEA5
	82000	90*69	0.15	20.4	LSMD630M5C823TF69
	100000	90*69	0.15	23.5	LSMD630M5C104TF69
	120000	90*98	0.15	25.2	LSMD630M5C124TF98
100V	12000	50*80	0.15	9	LSMD101M5C123TC80
	22000	75*69	0.15	13.2	LSMD101M5C223TE69
	39000	75*100	0.15	19.9	LSMD101M5C393TEA5
	39000	90*69	0.15	19.9	LSMD101M5C393TF69
	47000	90*98	0.15	26.7	LSMD101M5C473TF98
	56000	90*98	0.15	26.7	LSMD101M5C563TF98
	63000	90*98	0.15	27.2	LSMD101M5C633TF98
160V	4700	50*80	0.15	6.3	LSMD161M5C472TC80
	8200	75*69	0.15	9	LSMD161M5C822TF69
	15000	75*100	0.15	13.8	LSMD161M5C153TEA5
	15000	90*69	0.15	13.8	LSMD161M5C153TF69
	18000	90*98	0.15	16.5	LSMD161M5C183TF98
	22000	90*98	0.15	18.7	LSMD161M5C223TF98
200V	2200	50*50	0.15	5	LSMD201M5C222TC50
	3300	50*60	0.15	7	LSMD201M5C332TC60
	5600	75*60	0.15	10.2	LSMD201M5C562TE60
	8200	75*69	0.15	13.8	LSMD201M5C822TE69
	15000	90*69	0.15	16.2	LSMD201M5C154TF69
	18000	90*98	0.15	18.8	LSMD201M5C184TF98
250V	3300	50*80	0.15	8	LSMD251M5C332TC80
	5600	75*69	0.15	11.2	LSMD251M5C562TE69
	8200	90*69	0.15	15.4	LSMD251M5C822TF69
	10000	75*100	0.15	17.1	LSMD251M5C822TEA5
	15000	90*98	0.15	23.3	LSMD251M5C153TF98
350V	1500	50*80	0.15	5.4	LSMD351M5C152TC80
	2700	75*69	0.15	7.8	LSMD351M5C272TE69
	3900	90*69	0.15	10.6	LSMD351M5C392TF69
	4700	75*100	0.15	11.7	LSMD351M5C472TEA5
	6800	90*98	0.15	15.7	LSMD351M5C682TF98
400V	1000	50*80	0.15	4.4	LSMD401M5C102TC80
	1800	75*69	0.15	6.4	LSMD401M5C182TE69
	2200	90*69	0.15	8.1	LSMD401M5C222TF69
	3300	75*100	0.15	9.8	LSMD401M5C332TEA5
	3300	90*69	0.15	9.8	LSMD401M5C332TF69
	4700	90*98	0.15	13.1	LSMD401M5C472TF98
450V	1000	50*80	0.15	4.4	LSMD451M5C102TC80
	1500	75*69	0.15	5.8	LSMD451M5C152TE69
	2100	90*69	0.15	7.6	LSMD451M5C212TF69
	2200	90*69	0.15	8	LSMD451M5C222TF69
	3300	75*100	0.15	9.8	LSMD451M5C332TEA5
	3300	90*98	0.15	10.9	LSMD451M5C332TF98
	4700	90*98	0.15	14.2	LSMD451M5C472TF98

The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following
●Frequency Multiplier

Frequency（HZ）	50	120	300	1K	3K
coefficient	0.8	1.0	1.1	1.3	1.4

Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LHA series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun

Prev Standard Aluminum electrolytic capacitor

沒有了！ Next