high-end car audio Aluminum electrolytic capacitor

95℃ 2000hours

 ◆SPECIFIC ATIONS

items	Characteristics
Category temperature Range	-40~+95℃
Rated voltage Range	16~50VDC
Capacitance Tolerance	0.5~5.0F  ±10%                                                                                     at（20℃，120HZ）
Leakage Current	I=5.0mA at  Rated voltage (V)at 20℃after 5 minutes
Low Temperature characteristics	Capacitance change Z-40℃/Z+20℃≤12
Endurance	The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 95℃。
	Capacitance change	≤±20% of the initial value
	D.F. (tanδ)	≤200% of the initial specified value
	Leakage current	≤The initial specified value
Shelf Life	The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 95℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4
	Capacitance change	≤±20% of the initial value
	D.F. (tanδ)	≤200% of the initial specified value
	Leakage current	≤The initial specified value

SRANDRAD RATINGS

Cap	size	10			size	16				size		20				size		25
F	D*L	I~	DL	ESR (mΩ)	D*L	I~	DL	ESR (mΩ)		D*L	I~		DL	ESR (mΩ)	D*L		I~		DL	ESR (mΩ)
0.5	76*120	13.5	1.0	3.02	76*150	18.2	0.8	1.59		76*215	18.8		0.8	1.38	76*215		24.5		0.8	1.02
0.6	76*120	14.9	1.0	2.53	76*150	22.3	0.8	1.42		76*215	20.0		0.8	1.18	76*215		26.8		0.8	0.93
0.7	76*120	16.0	1.0	2.18	76*150	24.4	1.0	1.33		76*215	21.6		1.0	1.13	76*215		28.9		1.0	0.88
0.8	76*120	17.1	1.0	1.92	76*215	28.5	1.0	1.25		76*215	23.0		1.0	1.07	76*215		30.9		1.0	0.83
0.9	76*150	21.3	1.0	1.72	76*215	30.6	1.0	1.16		76*215	24.4		1.0	0.99	76*215		32.7		1.0	0.78
1.0	76*150	22.5	1.5	1.56	76*215	34.4	1.0	1.06		76*215	25.7		1.0	0.92	100*240		34.4		1.0	0.72
1.2	76*215	24.7	1.5	1.32	76*215	36.7	1.0	1.0		76*215	28.1		1.0	0.87	100*240		37.6		1.0	0.68
1.5	76*215	27.6	1.5	1.07	100*240	39.8	1.5	0.97		100*240	31.4		1.5	0.84	100*240		42.0		1.5	0.66
2.0	76*215	31.0	3.5	0.93	100*270	41.6	1.5	0.86		100*240	36.0		1.5	0.76	100*240		48.5		1.5	0.57
2.2	76*215	32.5	3.5	0.84	100*240	45.8	1.5	0.78		100*240	37.7		1.5	0.70	100*260		50.8		1.5	0.52
2.5	100*220	36.3	3.5	0.79	100*240	52.0	3.5	0.74		100*240	40.2		3.5	0.67	100*260		54.1		3.5	0.5
3.0	100*220	39.8	3.5	0.71	100*240	55.0	3.5	0.66		100*260	44.0		3.5	0.55	100*260		59.2		3.5	0.45
3.5	100*240	43.0	4.0	0.65	100*240	58.2	3.5	0.62		100*260	47.5		3.5	0.52	100*260		63.9		3.5	0.43
4.0	100*240	46.0	4.0	0.62	100*240	60.0	3.5	0.60		100*260	50.8		3.5	0.50	100*260		68.3		3.5	0.42
4.5	100*240	48.7	5.0	0.58	100*260	64.5	4.0	0.56		100*260	53.9		3.5	0.47
5.0	100*240	51.2	5.0	0.53	100*260	68.0	4.0	0.50		100*260	58.0		3.5	0.42

 
 

Cap	size	10			size	16
F	D*L	I~	DL	ESR (mΩ)	D*L	I~	DL	ESR (mΩ)
0.5	76*180	15.3	1.0		89*220	21.2	0.8
0.6	89*160	16.1	1.0		76*230	24.1	0.8
0.7	89*180	18.2	1.0
0.8	89*200	19.5	1.0
0.9	89*220	22.4	1.0
1.0	89*230	25.1	1.5

◆   RTED RIPPLE CURRENT MUIERS
The ripple frequency and standard list of the specified value is not at the same time, please use the value is less than the following
Frequency Multiplier

Frequency（HZ）	120	300	1K	3K
coefficient	1.0	1.2	1.4	1.5

 
※   Note : The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the LB series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For the details, please contact representative of capsun